Wedding Parament Finished

Yesterday I delivered the wedding antependium to the church.  It was a dark, dreary day with not enough good light for a proper picture and I had to dodge rain showers to get a couple of quick shots outside. None of my pictures are very good, but time was pressing.  June is wedding season after all, and there is one scheduled for today at the church.

I'll show you the extra sleeve I added across centre back which holds a thin rod to keep the arms of the cross out.  It is imperative that these things hang perfectly straight and flat. The whole piece is stiffened with two layers of interfacing, one of which is a heavy decorator weight.  This made the parament extremely awkward to quilt on my domestic machine - it refused to fold up in the throat.  It was like quilting a board! Not surprisingly, my Bernina quilted feathers through all those layers with no issues.  

It fit the pulpit perfectly.  It was even darker inside than out and the pictures are disappointing.  However, you can get a sense of the effect. From the back of the church, only the golden rings at the centre are visible.

As you walk down the aisle and get a bit closer, the colours of the outer rings begin to emerge. Three shades for three strands of rings which link to form a cross.

The ministers were very pleased and frankly- if I may say so - it looked gorgeous in that setting.  

Trouble Your Troubles

“I have heard there are troubles of more than one kind. Some come from ahead and some come from behind. But I’ve bought a big bat. I’m all ready you see. Now my troubles are going to have troubles with me!”  (Dr. Suess)

Oh my...I've been avoiding looking at this antependium all week because I don't like the shape;  the top needs to be trimmed to accentuate that the design forms a cross but I just don't want to take the scissors to it again.  I trimmed the bottom section last week and am reasonably happy with it (although it took three full days before I looked at it again after I did that!)

I had hoped to leave the top section straight up to the hanging rod so that it would be well supported, but it makes the whole piece look top heavy.  Like an engineer designing a building, my plan B now is to double up the beam across the centre to carry the weight (i.e. if needed, I will add a sleeve with a rod across the centre to make sure it does not curl on the pulpit.) I've marked where I need to trim to make it match the curves in the bottom part;  now I just need the courage to pick up my scissors.  I don't have a big bat, Dr. Suess...but I have sharp scissors.

“Today is your day! Your mountain is waiting. So… get on your way.”  

A wee hold up

The quilting has gone ok on the silk antependium - not perfect, but I wasn't shooting for perfect.  The scheme has been revised a bit and I've decided not to add multiple lines of cross hatching in the centre, but rather a single diagonal line.  In reality, there's only  2" of space there so this allows a bit of dimension to the surface.

As much as I was hoping to have this finished up by the end of the week, I have run short of fabric for the binding so will need a trip out of town to find some more white silk. (Imagine: an excuse to buy fabric...and as you will see in the next post, I`ve already added to my stash this week)

Decisions, Decisions...

The wedding antependium has been pieced and ready for quilting for a few days but I have been pondering my options on how to proceed.  Silk is a different animal than cotton and needs special treatment.  Using scraps of the white dupioni, I tested several different markers and left them overnight.  The purple air soluble was as bright the next day as when it was applied which is very odd.   It took a fair bit of soaking in warm water to remove the blue water soluble one, and even a bit of scrubbing for the Crayola washable marker to disappear.  The FriXXion leaves a distinct white mark which in this case is not horrible as it is a white fabric but even so I hesitate to use it...just in case.  I've decided in my typical fools-rush-in fashion that I will free hand the quilting and not mark anything.  I drew out my spaces full sized and doodled a simple design which I think I can do. 

I *think* if I eyeball the curve and make the feathers fit an imaginary boundary it will be ok.  Humility quilting for sure...A piece of masking tape across the centre point will give a temporary line to follow for the first straight line which the edge of the presser foot can then echo for the cross-hatching. Last evening was spent practicing the design on the full sized pattern.  Thankfully, I quilt better than I draw as my fingers no longer hold a pen well.  Polly watched jealously all the attention that paper was commanding.

Naturally, when I laid it on the floor to take a picture she saw her opportunity to claim it as hers.

The actual piece is hanging up out of Polly's reach or I am sure she would have that too...

(Blogger turned the picture sideways so you'll have to tip your head over to see it correctly!)  Some collective finger-crossing would be appreciated for the quilting because it cannot be ripped out successfully if it doesn't work.  I would have to start the piece over from scratch.  Oh, my...

DWR Appliqué

Making it up as you go along means you have to be open to "let's try this and see it if works."  So far so good.  Having never made a Double Wedding Ring (DWR) before I was unsure if it would be tricky to line up the rings for easy matching.  I decided that logically the rings would meet at a 45° angle in the corner.

It was a snap to put them together (sometimes that's not a good sign!)  It took three full days to appliqué the rings onto the squares;  working with silk is very slow...and slippery!

After the rings were appliquéd, I held my breath and began to join the blocks into rows.  Thankfully, the rings matched up easily.

These seams will all be pressed open with a damp press cloth and then the rows will be joined together.  It's exciting when it starts to come together!

Linking Rings

In addition to gold, there are three other shades of silk being used to form the design on the pure white background:  champagne, cream and ivory (no hubby, those words don't all mean the same thing *-). The colours are pale at the edge and intensify towards the centre.   It's slow going but the process is enjoyable.

Wedding Antependium Begun

In the past I didn't show pictures of the paraments as they were being sewn, waiting instead until the congregation had seen them.  As this one is for weddings, I don't think that's really a consideration anymore as it won't be presented as a beginning to a new church season.  I hope I am not breaking any rules!

Because the design is based on a traditional double wedding ring block, there were lots of choices to be made about how best to approach the construction.  Generally the blocks are pieced, but appliquéing the rings is also an option and that's the method I chose.  Within that discipline, I also had to consider if I would appliqué individual blocks or simply do the rings on a wholecloth background.  I decided to do individual blocks;  this way will allow me to combine patchwork and appliqué in the construction...and also help define my space for quilting.  I began by applying a featherweight fusible interfacing to the back of the silk habotai. The antependium needs to hang straight on the pulpit so having the piece a bit stiff is an advantage.

These are new silk pins so they are nice and sharp;  notice the pins only go in the seam allowance.  They can leave holes in the delicate silk.

I also bought new scissors and they are awesomely sharp!  They are identical to my old ones, so a special thank you to Lesley who gave me the cute little scissors fob. It makes it easy to see which pair to pick up.

I cut freezer paper templates with the seam allowance removed, ironed them to the back of the interfaced silk and using a glue stick, folded the edges under.  I clipped the concave curve so it will turn smoothly but not the convex one which turns neatly without encouragement.

The rings fit nicely on the 6" blocks.

I printed out another full sized pattern to make it easy to check the placement of the rings as I go.

 The big trick will be hiding the pattern from Polly...